Products

Product Catalog

Standard Basis

Industry basis

Current Injection Clamp PECL-100

PECL-100 electromagnetic clamp complies with the national standard IEC 61000-4-6. It is a special product for testing the immunity of conducted disturbances induced by radio frequency. It injects the disturbance signal into the cable assembly in the card slot so that the EUT under test can withstand the values ​​required by the national standard. When making precise measurements, the electromagnetic clamp is also equipped with auxiliary absorption clamps and calibration parts.

Product series: Solution

Product series: EMC/EMS

Product series: EMC EMS

Product series: EMC System

Product series: Products

Product series: EMC System

  • Details
  • 满足标准
  • 技术参数
  • PECL-100 electromagnetic clamp complies with the national standard IEC 61000-4-6. It is a special product for testing the immunity of conducted disturbances induced by radio frequency. It injects the disturbance signal into the cable assembly in the card slot so that the EUT under test can withstand the values ​​required by the national standard. When making precise measurements, the electromagnetic clamp is also equipped with auxiliary absorption clamps and calibration parts.

     

    技术参数

    耦合系数

    9.5dB±1.5dB

    注入功率

    100W(5分钟)

    注入频率

    150kHz~230MHz

    耦合退耦方向系数

    大于10dB>10MHz

    可测线缆直径

    <Ф18mm

    附件

    100W 6dB衰减器、Ф4mm测试棒(725mm)、校准支架、

    适配器150Ω/50Ω、N型50Ω负载 5W、测试电缆、说明书

Key words:

Product Message